Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
9771 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49116 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: use memset avoid memory leaks Use memset to initialize structs to prevent memory leaks in l2cap_ecred_connect | ||||
| CVE-2022-49117 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mips: ralink: fix a refcount leak in ill_acc_of_setup() of_node_put(np) needs to be called when pdev == NULL. | ||||
| CVE-2022-49119 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix memory leak in pm8001_chip_fw_flash_update_req() In pm8001_chip_fw_flash_update_build(), if pm8001_chip_fw_flash_update_build() fails, the struct fw_control_ex allocated must be freed. | ||||
| CVE-2022-49123 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ath11k: Fix frames flush failure caused by deadlock We are seeing below warnings: kernel: [25393.301506] ath11k_pci 0000:01:00.0: failed to flush mgmt transmit queue 0 kernel: [25398.421509] ath11k_pci 0000:01:00.0: failed to flush mgmt transmit queue 0 kernel: [25398.421831] ath11k_pci 0000:01:00.0: dropping mgmt frame for vdev 0, is_started 0 this means ath11k fails to flush mgmt. frames because wmi_mgmt_tx_work has no chance to run in 5 seconds. By setting /proc/sys/kernel/hung_task_timeout_secs to 20 and increasing ATH11K_FLUSH_TIMEOUT to 50 we get below warnings: kernel: [ 120.763160] INFO: task wpa_supplicant:924 blocked for more than 20 seconds. kernel: [ 120.763169] Not tainted 5.10.90 #12 kernel: [ 120.763177] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: [ 120.763186] task:wpa_supplicant state:D stack: 0 pid: 924 ppid: 1 flags:0x000043a0 kernel: [ 120.763201] Call Trace: kernel: [ 120.763214] __schedule+0x785/0x12fa kernel: [ 120.763224] ? lockdep_hardirqs_on_prepare+0xe2/0x1bb kernel: [ 120.763242] schedule+0x7e/0xa1 kernel: [ 120.763253] schedule_timeout+0x98/0xfe kernel: [ 120.763266] ? run_local_timers+0x4a/0x4a kernel: [ 120.763291] ath11k_mac_flush_tx_complete+0x197/0x2b1 [ath11k 13c3a9bf37790f4ac8103b3decf7ab4008ac314a] kernel: [ 120.763306] ? init_wait_entry+0x2e/0x2e kernel: [ 120.763343] __ieee80211_flush_queues+0x167/0x21f [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763378] __ieee80211_recalc_idle+0x105/0x125 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763411] ieee80211_recalc_idle+0x14/0x27 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763441] ieee80211_free_chanctx+0x77/0xa2 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763473] __ieee80211_vif_release_channel+0x100/0x131 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763540] ieee80211_vif_release_channel+0x66/0x81 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763572] ieee80211_destroy_auth_data+0xa3/0xe6 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763612] ieee80211_mgd_deauth+0x178/0x29b [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763654] cfg80211_mlme_deauth+0x1a8/0x22c [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763697] nl80211_deauthenticate+0xfa/0x123 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763715] genl_rcv_msg+0x392/0x3c2 kernel: [ 120.763750] ? nl80211_associate+0x432/0x432 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763782] ? nl80211_associate+0x432/0x432 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763802] ? genl_rcv+0x36/0x36 kernel: [ 120.763814] netlink_rcv_skb+0x89/0xf7 kernel: [ 120.763829] genl_rcv+0x28/0x36 kernel: [ 120.763840] netlink_unicast+0x179/0x24b kernel: [ 120.763854] netlink_sendmsg+0x393/0x401 kernel: [ 120.763872] sock_sendmsg+0x72/0x76 kernel: [ 120.763886] ____sys_sendmsg+0x170/0x1e6 kernel: [ 120.763897] ? copy_msghdr_from_user+0x7a/0xa2 kernel: [ 120.763914] ___sys_sendmsg+0x95/0xd1 kernel: [ 120.763940] __sys_sendmsg+0x85/0xbf kernel: [ 120.763956] do_syscall_64+0x43/0x55 kernel: [ 120.763966] entry_SYSCALL_64_after_hwframe+0x44/0xa9 kernel: [ 120.763977] RIP: 0033:0x79089f3fcc83 kernel: [ 120.763986] RSP: 002b:00007ffe604f0508 EFLAGS: 00000246 ORIG_RAX: 000000000000002e kernel: [ 120.763997] RAX: ffffffffffffffda RBX: 000059b40e987690 RCX: 000079089f3fcc83 kernel: [ 120.764006] RDX: 0000000000000000 RSI: 00007ffe604f0558 RDI: 0000000000000009 kernel: [ 120.764014] RBP: 00007ffe604f0540 R08: 0000000000000004 R09: 0000000000400000 kernel: [ 120.764023] R10: 00007ffe604f0638 R11: 0000000000000246 R12: 000059b40ea04980 kernel: [ 120.764032] R13: 00007ffe604 ---truncated--- | ||||
| CVE-2022-49125 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/sprd: fix potential NULL dereference 'drm' could be null in sprd_drm_shutdown, and drm_warn maybe dereference it, remove this warning log. v1 -> v2: - Split checking platform_get_resource() return value to a separate patch - Use dev_warn() instead of removing the warning log | ||||
| CVE-2022-49126 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix memory leaks Fix memory leaks related to operational reply queue's memory segments which are not getting freed while unloading the driver. | ||||
| CVE-2022-49128 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: Add missing pm_runtime_put_sync pm_runtime_get_sync() will increase the rumtime PM counter even when it returns an error. Thus a pairing decrement is needed to prevent refcount leak. Fix this by replacing this API with pm_runtime_resume_and_get(), which will not change the runtime PM counter on error. Besides, a matching decrement is needed on the error handling path to keep the counter balanced. | ||||
| CVE-2022-49131 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ath11k: fix kernel panic during unload/load ath11k modules Call netif_napi_del() from ath11k_ahb_free_ext_irq() to fix the following kernel panic when unload/load ath11k modules for few iterations. [ 971.201365] Unable to handle kernel paging request at virtual address 6d97a208 [ 971.204227] pgd = 594c2919 [ 971.211478] [6d97a208] *pgd=00000000 [ 971.214120] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 971.412024] CPU: 2 PID: 4435 Comm: insmod Not tainted 5.4.89 #0 [ 971.434256] Hardware name: Generic DT based system [ 971.440165] PC is at napi_by_id+0x10/0x40 [ 971.445019] LR is at netif_napi_add+0x160/0x1dc [ 971.743127] (napi_by_id) from [<807d89a0>] (netif_napi_add+0x160/0x1dc) [ 971.751295] (netif_napi_add) from [<7f1209ac>] (ath11k_ahb_config_irq+0xf8/0x414 [ath11k_ahb]) [ 971.759164] (ath11k_ahb_config_irq [ath11k_ahb]) from [<7f12135c>] (ath11k_ahb_probe+0x40c/0x51c [ath11k_ahb]) [ 971.768567] (ath11k_ahb_probe [ath11k_ahb]) from [<80666864>] (platform_drv_probe+0x48/0x94) [ 971.779670] (platform_drv_probe) from [<80664718>] (really_probe+0x1c8/0x450) [ 971.789389] (really_probe) from [<80664cc4>] (driver_probe_device+0x15c/0x1b8) [ 971.797547] (driver_probe_device) from [<80664f60>] (device_driver_attach+0x44/0x60) [ 971.805795] (device_driver_attach) from [<806650a0>] (__driver_attach+0x124/0x140) [ 971.814822] (__driver_attach) from [<80662adc>] (bus_for_each_dev+0x58/0xa4) [ 971.823328] (bus_for_each_dev) from [<80663a2c>] (bus_add_driver+0xf0/0x1e8) [ 971.831662] (bus_add_driver) from [<806658a4>] (driver_register+0xa8/0xf0) [ 971.839822] (driver_register) from [<8030269c>] (do_one_initcall+0x78/0x1ac) [ 971.847638] (do_one_initcall) from [<80392524>] (do_init_module+0x54/0x200) [ 971.855968] (do_init_module) from [<803945b0>] (load_module+0x1e30/0x1ffc) [ 971.864126] (load_module) from [<803948b0>] (sys_init_module+0x134/0x17c) [ 971.871852] (sys_init_module) from [<80301000>] (ret_fast_syscall+0x0/0x50) Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.6.0.1-00760-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2022-49130 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ath11k: mhi: use mhi_sync_power_up() If amss.bin was missing ath11k would crash during 'rmmod ath11k_pci'. The reason for that was that we were using mhi_async_power_up() which does not check any errors. But mhi_sync_power_up() on the other hand does check for errors so let's use that to fix the crash. I was not able to find a reason why an async version was used. ath11k_mhi_start() (which enables state ATH11K_MHI_POWER_ON) is called from ath11k_hif_power_up(), which can sleep. So sync version should be safe to use here. [ 145.569731] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI [ 145.569789] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 145.569843] CPU: 2 PID: 1628 Comm: rmmod Kdump: loaded Tainted: G W 5.16.0-wt-ath+ #567 [ 145.569898] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 [ 145.569956] RIP: 0010:ath11k_hal_srng_access_begin+0xb5/0x2b0 [ath11k] [ 145.570028] Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 ec 01 00 00 48 8b ab a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 ea 48 c1 ea 03 <0f> b6 14 02 48 89 e8 83 e0 07 83 c0 03 45 85 ed 75 48 38 d0 7c 08 [ 145.570089] RSP: 0018:ffffc900025d7ac0 EFLAGS: 00010246 [ 145.570144] RAX: dffffc0000000000 RBX: ffff88814fca2dd8 RCX: 1ffffffff50cb455 [ 145.570196] RDX: 0000000000000000 RSI: ffff88814fca2dd8 RDI: ffff88814fca2e80 [ 145.570252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffa8659497 [ 145.570329] R10: fffffbfff50cb292 R11: 0000000000000001 R12: ffff88814fca0000 [ 145.570410] R13: 0000000000000000 R14: ffff88814fca2798 R15: ffff88814fca2dd8 [ 145.570465] FS: 00007fa399988540(0000) GS:ffff888233e00000(0000) knlGS:0000000000000000 [ 145.570519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 145.570571] CR2: 00007fa399b51421 CR3: 0000000137898002 CR4: 00000000003706e0 [ 145.570623] Call Trace: [ 145.570675] <TASK> [ 145.570727] ? ath11k_ce_tx_process_cb+0x34b/0x860 [ath11k] [ 145.570797] ath11k_ce_tx_process_cb+0x356/0x860 [ath11k] [ 145.570864] ? tasklet_init+0x150/0x150 [ 145.570919] ? ath11k_ce_alloc_pipes+0x280/0x280 [ath11k] [ 145.570986] ? tasklet_clear_sched+0x42/0xe0 [ 145.571042] ? tasklet_kill+0xe9/0x1b0 [ 145.571095] ? tasklet_clear_sched+0xe0/0xe0 [ 145.571148] ? irq_has_action+0x120/0x120 [ 145.571202] ath11k_ce_cleanup_pipes+0x45a/0x580 [ath11k] [ 145.571270] ? ath11k_pci_stop+0x10e/0x170 [ath11k_pci] [ 145.571345] ath11k_core_stop+0x8a/0xc0 [ath11k] [ 145.571434] ath11k_core_deinit+0x9e/0x150 [ath11k] [ 145.571499] ath11k_pci_remove+0xd2/0x260 [ath11k_pci] [ 145.571553] pci_device_remove+0x9a/0x1c0 [ 145.571605] __device_release_driver+0x332/0x660 [ 145.571659] driver_detach+0x1e7/0x2c0 [ 145.571712] bus_remove_driver+0xe2/0x2d0 [ 145.571772] pci_unregister_driver+0x21/0x250 [ 145.571826] __do_sys_delete_module+0x30a/0x4b0 [ 145.571879] ? free_module+0xac0/0xac0 [ 145.571933] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370 [ 145.571986] ? syscall_enter_from_user_mode+0x1d/0x50 [ 145.572039] ? lockdep_hardirqs_on+0x79/0x100 [ 145.572097] do_syscall_64+0x3b/0x90 [ 145.572153] entry_SYSCALL_64_after_hwframe+0x44/0xae Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 | ||||
| CVE-2022-49134 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum: Guard against invalid local ports When processing events generated by the device's firmware, the driver protects itself from events reported for non-existent local ports, but not for the CPU port (local port 0), which exists, but does not have all the fields as any local port. This can result in a NULL pointer dereference when trying access 'struct mlxsw_sp_port' fields which are not initialized for CPU port. Commit 63b08b1f6834 ("mlxsw: spectrum: Protect driver from buggy firmware") already handled such issue by bailing early when processing a PUDE event reported for the CPU port. Generalize the approach by moving the check to a common function and making use of it in all relevant places. | ||||
| CVE-2022-49135 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix memory leak [why] Resource release is needed on the error handling path to prevent memory leak. [how] Fix this by adding kfree on the error handling path. | ||||
| CVE-2022-49137 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdgpu/amdgpu_cs: fix refcount leak of a dma_fence obj This issue takes place in an error path in amdgpu_cs_fence_to_handle_ioctl(). When `info->in.what` falls into default case, the function simply returns -EINVAL, forgetting to decrement the reference count of a dma_fence obj, which is bumped earlier by amdgpu_cs_get_fence(). This may result in reference count leaks. Fix it by decreasing the refcount of specific object before returning the error code. | ||||
| CVE-2022-49139 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix null ptr deref on hci_sync_conn_complete_evt This event is just specified for SCO and eSCO link types. On the reception of a HCI_Synchronous_Connection_Complete for a BDADDR of an existing LE connection, LE link type and a status that triggers the second case of the packet processing a NULL pointer dereference happens, as conn->link is NULL. | ||||
| CVE-2022-49141 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: felix: fix possible NULL pointer dereference As the possible failure of the allocation, kzalloc() may return NULL pointer. Therefore, it should be better to check the 'sgi' in order to prevent the dereference of NULL pointer. | ||||
| CVE-2021-47128 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf, lockdown, audit: Fix buggy SELinux lockdown permission checks Commit 59438b46471a ("security,lockdown,selinux: implement SELinux lockdown") added an implementation of the locked_down LSM hook to SELinux, with the aim to restrict which domains are allowed to perform operations that would breach lockdown. This is indirectly also getting audit subsystem involved to report events. The latter is problematic, as reported by Ondrej and Serhei, since it can bring down the whole system via audit: 1) The audit events that are triggered due to calls to security_locked_down() can OOM kill a machine, see below details [0]. 2) It also seems to be causing a deadlock via avc_has_perm()/slow_avc_audit() when trying to wake up kauditd, for example, when using trace_sched_switch() tracepoint, see details in [1]. Triggering this was not via some hypothetical corner case, but with existing tools like runqlat & runqslower from bcc, for example, which make use of this tracepoint. Rough call sequence goes like: rq_lock(rq) -> -------------------------+ trace_sched_switch() -> | bpf_prog_xyz() -> +-> deadlock selinux_lockdown() -> | audit_log_end() -> | wake_up_interruptible() -> | try_to_wake_up() -> | rq_lock(rq) --------------+ What's worse is that the intention of 59438b46471a to further restrict lockdown settings for specific applications in respect to the global lockdown policy is completely broken for BPF. The SELinux policy rule for the current lockdown check looks something like this: allow <who> <who> : lockdown { <reason> }; However, this doesn't match with the 'current' task where the security_locked_down() is executed, example: httpd does a syscall. There is a tracing program attached to the syscall which triggers a BPF program to run, which ends up doing a bpf_probe_read_kernel{,_str}() helper call. The selinux_lockdown() hook does the permission check against 'current', that is, httpd in this example. httpd has literally zero relation to this tracing program, and it would be nonsensical having to write an SELinux policy rule against httpd to let the tracing helper pass. The policy in this case needs to be against the entity that is installing the BPF program. For example, if bpftrace would generate a histogram of syscall counts by user space application: bpftrace -e 'tracepoint:raw_syscalls:sys_enter { @[comm] = count(); }' bpftrace would then go and generate a BPF program from this internally. One way of doing it [for the sake of the example] could be to call bpf_get_current_task() helper and then access current->comm via one of bpf_probe_read_kernel{,_str}() helpers. So the program itself has nothing to do with httpd or any other random app doing a syscall here. The BPF program _explicitly initiated_ the lockdown check. The allow/deny policy belongs in the context of bpftrace: meaning, you want to grant bpftrace access to use these helpers, but other tracers on the system like my_random_tracer _not_. Therefore fix all three issues at the same time by taking a completely different approach for the security_locked_down() hook, that is, move the check into the program verification phase where we actually retrieve the BPF func proto. This also reliably gets the task (current) that is trying to install the BPF tracing program, e.g. bpftrace/bcc/perf/systemtap/etc, and it also fixes the OOM since we're moving this out of the BPF helper's fast-path which can be called several millions of times per second. The check is then also in line with other security_locked_down() hooks in the system where the enforcement is performed at open/load time, for example, open_kcore() for /proc/kcore access or module_sig_check() for module signatures just to pick f ---truncated--- | ||||
| CVE-2021-47132 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix sk_forward_memory corruption on retransmission MPTCP sk_forward_memory handling is a bit special, as such field is protected by the msk socket spin_lock, instead of the plain socket lock. Currently we have a code path updating such field without handling the relevant lock: __mptcp_retrans() -> __mptcp_clean_una_wakeup() Several helpers in __mptcp_clean_una_wakeup() will update sk_forward_alloc, possibly causing such field corruption, as reported by Matthieu. Address the issue providing and using a new variant of blamed function which explicitly acquires the msk spin lock. | ||||
| CVE-2021-47152 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix data stream corruption Maxim reported several issues when forcing a TCP transparent proxy to use the MPTCP protocol for the inbound connections. He also provided a clean reproducer. The problem boils down to 'mptcp_frag_can_collapse_to()' assuming that only MPTCP will use the given page_frag. If others - e.g. the plain TCP protocol - allocate page fragments, we can end-up re-using already allocated memory for mptcp_data_frag. Fix the issue ensuring that the to-be-expanded data fragment is located at the current page frag end. v1 -> v2: - added missing fixes tag (Mat) | ||||
| CVE-2021-47159 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: fix a crash if ->get_sset_count() fails If ds->ops->get_sset_count() fails then it "count" is a negative error code such as -EOPNOTSUPP. Because "i" is an unsigned int, the negative error code is type promoted to a very high value and the loop will corrupt memory until the system crashes. Fix this by checking for error codes and changing the type of "i" to just int. | ||||
| CVE-2021-47160 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: mt7530: fix VLAN traffic leaks PCR_MATRIX field was set to all 1's when VLAN filtering is enabled, but was not reset when it is disabled, which may cause traffic leaks: ip link add br0 type bridge vlan_filtering 1 ip link add br1 type bridge vlan_filtering 1 ip link set swp0 master br0 ip link set swp1 master br1 ip link set br0 type bridge vlan_filtering 0 ip link set br1 type bridge vlan_filtering 0 # traffic in br0 and br1 will start leaking to each other As port_bridge_{add,del} have set up PCR_MATRIX properly, remove the PCR_MATRIX write from mt7530_port_set_vlan_aware. | ||||
| CVE-2021-47163 | 1 Linux | 1 Linux Kernel | 2025-03-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tipc: wait and exit until all work queues are done On some host, a crash could be triggered simply by repeating these commands several times: # modprobe tipc # tipc bearer enable media udp name UDP1 localip 127.0.0.1 # rmmod tipc [] BUG: unable to handle kernel paging request at ffffffffc096bb00 [] Workqueue: events 0xffffffffc096bb00 [] Call Trace: [] ? process_one_work+0x1a7/0x360 [] ? worker_thread+0x30/0x390 [] ? create_worker+0x1a0/0x1a0 [] ? kthread+0x116/0x130 [] ? kthread_flush_work_fn+0x10/0x10 [] ? ret_from_fork+0x35/0x40 When removing the TIPC module, the UDP tunnel sock will be delayed to release in a work queue as sock_release() can't be done in rtnl_lock(). If the work queue is schedule to run after the TIPC module is removed, kernel will crash as the work queue function cleanup_beareri() code no longer exists when trying to invoke it. To fix it, this patch introduce a member wq_count in tipc_net to track the numbers of work queues in schedule, and wait and exit until all work queues are done in tipc_exit_net(). | ||||