Total
102 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-53271 | 2024-12-18 | 7.1 High | ||
| Envoy is a cloud-native high-performance edge/middle/service proxy. In affected versions envoy does not properly handle http 1.1 non-101 1xx responses. This can lead to downstream failures in networked devices. This issue has been addressed in versions 1.31.5 and 1.32.3. Users are advised to upgrade. There are no known workarounds for this issue. | ||||
| CVE-2024-53270 | 1 Redhat | 1 Service Mesh | 2024-12-18 | 7.5 High |
| Envoy is a cloud-native high-performance edge/middle/service proxy. In affected versions `sendOverloadError` is going to assume the active request exists when `envoy.load_shed_points.http1_server_abort_dispatch` is configured. If `active_request` is nullptr, only onMessageBeginImpl() is called. However, the `onMessageBeginImpl` will directly return ok status if the stream is already reset leading to the nullptr reference. The downstream reset can actually happen during the H/2 upstream reset. As a result envoy may crash. This issue has been addressed in releases 1.32.3, 1.31.5, 1.30.9, and 1.29.12. Users are advised to upgrade. Users unable to upgrade may disable `http1_server_abort_dispatch` load shed point and/or use a high threshold. | ||||
| CVE-2024-53269 | 2024-12-18 | 4.5 Medium | ||
| Envoy is a cloud-native high-performance edge/middle/service proxy. When additional address are not ip addresses, then the Happy Eyeballs sorting algorithm will crash in data plane. This issue has been addressed in releases 1.32.2, 1.31.4, and 1.30.8. Users are advised to upgrade. Users unable to upgrade may disable Happy Eyeballs and/or change the IP configuration. | ||||
| CVE-2024-32896 | 1 Google | 1 Android | 2024-11-29 | 8.1 High |
| there is a possible way to bypass due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation. | ||||
| CVE-2021-1236 | 2 Cisco, Snort | 19 1100-4p Integrated Services Router, 1100-8p Integrated Services Router, 1101-4p Integrated Services Router and 16 more | 2024-11-26 | 5.3 Medium |
| Multiple Cisco products are affected by a vulnerability in the Snort application detection engine that could allow an unauthenticated, remote attacker to bypass the configured policies on an affected system. The vulnerability is due to a flaw in the detection algorithm. An attacker could exploit this vulnerability by sending crafted packets that would flow through an affected system. A successful exploit could allow the attacker to bypass the configured policies and deliver a malicious payload to the protected network. | ||||
| CVE-2024-52811 | 1 Ngtcp2 | 1 Ngtcp2 | 2024-11-25 | 8.2 High |
| The ngtcp2 project is an effort to implement IETF QUIC protocol in C. In affected versions acks are not validated before being written to the qlog leading to a buffer overflow. In `ngtcp2_conn::conn_recv_pkt` for an ACK, there was new logic that got added to skip `conn_recv_ack` if an ack has already been processed in the payload. However, this causes us to also skip `ngtcp2_pkt_validate_ack`. The ack which was skipped still got written to qlog. The bug occurs in `ngtcp2_qlog::write_ack_frame`. It is now possible to reach this code with an invalid ack, suppose `largest_ack=0` and `first_ack_range=15`. Subtracting `largest_ack - first_ack_range` will lead to an integer underflow which is 20 chars long. However, the ngtcp2 qlog code assumes the number written is a signed integer and only accounts for 19 characters of overhead (see `NGTCP2_QLOG_ACK_FRAME_RANGE_OVERHEAD`). Therefore, we overwrite the buffer causing a heap overflow. This is high priority and could potentially impact many users if they enable qlog. qlog is disabled by default. Due to its overhead, it is most likely used for debugging purpose, but the actual use is unknown. ngtcp2 v1.9.1 fixes the bug and users are advised to upgrade. Users unable to upgrade should not turn on qlog. | ||||
| CVE-2024-5659 | 2024-11-21 | N/A | ||
| Rockwell Automation was made aware of a vulnerability that causes all affected controllers on the same network to result in a major nonrecoverable fault(MNRF/Assert). This vulnerability could be exploited by sending abnormal packets to the mDNS port. If exploited, the availability of the device would be compromised. | ||||
| CVE-2024-37153 | 1 Evmos | 1 Evmos | 2024-11-21 | 7.5 High |
| Evmos is the Ethereum Virtual Machine (EVM) Hub on the Cosmos Network. There is an issue with how to liquid stake using Safe which itself is a contract. The bug only appears when there is a local state change together with an ICS20 transfer in the same function and uses the contract's balance, that is using the contract address as the sender parameter in an ICS20 transfer using the ICS20 precompile. This is in essence the "infinite money glitch" allowing contracts to double the supply of Evmos after each transaction.The issue has been patched in versions >=V18.1.0. | ||||
| CVE-2024-35190 | 2024-11-21 | 5.8 Medium | ||
| Asterisk is an open source private branch exchange and telephony toolkit. After upgrade to 18.23.0, ALL unauthorized SIP requests are identified as PJSIP Endpoint of local asterisk server. This vulnerability is fixed in 18.23.1, 20.8.1, and 21.3.1. | ||||
| CVE-2024-33431 | 1 Stsaz | 1 Phiola | 2024-11-21 | 6.5 Medium |
| An issue in phiola/src/afilter/conv.c:115 of phiola v2.0-rc22 allows a remote attacker to cause a denial of service via a crafted .wav file. | ||||
| CVE-2024-32971 | 2024-11-21 | 9.1 Critical | ||
| Apollo Router is a configurable, graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. The affected versions of Apollo Router contain a bug that in limited circumstances, could lead to unexpected operations being executed which can result in unintended data or effects. This only affects Router instances configured to use distributed query plan caching. The root cause of this defect is a bug in Apollo Router’s cache retrieval logic: When this defect is present and distributed query planning caching is enabled, asking the Router to execute an operation (whether it is a query, a mutation, or a subscription) may result in an unexpected variation of that operation being executed or the generation of unexpected errors. The issue stems from inadvertently executing a modified version of a previously executed operation, whose query plan is stored in the underlying cache (specifically, Redis). Depending on the type of the operation, the result may vary. For a query, results may be fetched that don’t match what was requested (e.g., rather than running `fetchUsers(type: ENTERPRISE)` the Router may run `fetchUsers(type: TRIAL)`. For a mutation, this may result in incorrect mutations being sent to underlying subgraph servers (e.g., rather than sending `deleteUser(id: 10)` to a subgraph, the Router may run `deleteUser(id: 12)`. Users who are using distributed query plan caching, are advised to either upgrade to version 1.45.1 or above or downgrade to version 1.43.2 of the Apollo Router. Apollo Router versions 1.44.0 or 1.45.0 are not recommended for use and have been withdrawn. Users unable to upgrade can disable distributed query plan caching to mitigate this issue. | ||||
| CVE-2024-30246 | 2024-11-21 | 7.6 High | ||
| Tuleap is an Open Source Suite to improve management of software developments and collaboration. A malicious user could exploit this issue on purpose to delete information on the instance or possibly gain access to restricted artifacts. It is however not possible to control exactly which information is deleted. Information from theDate, File, Float, Int, List, OpenList, Text, and Permissions on artifact (this one can lead to the disclosure of restricted information) fields can be impacted. This vulnerability is fixed in Tuleap Community Edition version 15.7.99.6 and Tuleap Enterprise Edition 15.7-2, 15.6-5, 15.5-6, 15.4-8, 15.3-6, 15.2-5, 15.1-9, 15.0-9, and 14.12-6. | ||||
| CVE-2024-0313 | 1 Skyhighsecurity | 1 Client Proxy | 2024-11-21 | 5.5 Medium |
| A malicious insider exploiting this vulnerability can circumvent existing security controls put in place by the organization. On the contrary, if the victim is legitimately using the temporary bypass to reach out to the Internet for retrieving application and system updates, a remote device could target it and undo the bypass, thereby denying the victim access to the update service, causing it to fail. | ||||
| CVE-2023-49798 | 1 Openzeppelin | 2 Contracts, Contracts Upgradeable | 2024-11-21 | 5.9 Medium |
| OpenZeppelin Contracts is a library for smart contract development. A merge issue when porting the 5.0.1 patch to the 4.9 branch caused a line duplication. In the version of `Multicall.sol` released in `@openzeppelin/contracts@4.9.4` and `@openzeppelin/contracts-upgradeable@4.9.4`, all subcalls are executed twice. Concretely, this exposes a user to unintentionally duplicate operations like asset transfers. The duplicated delegatecall was removed in version 4.9.5. The 4.9.4 version is marked as deprecated. Users are advised to upgrade. There are no known workarounds for this issue. | ||||
| CVE-2023-41376 | 1 Nokia | 2 Service Router Linux, Service Router Operating System | 2024-11-21 | 7.5 High |
| Nokia Service Router Operating System (SR OS) 22.10 and SR Linux, when error-handling update-fault-tolerance is not enabled, mishandle BGP path attributes. | ||||
| CVE-2023-41338 | 1 Gofiber | 1 Fiber | 2024-11-21 | 5.3 Medium |
| Fiber is an Express inspired web framework built in the go language. Versions of gofiber prior to 2.49.2 did not properly restrict access to localhost. This issue impacts users of our project who rely on the `ctx.IsFromLocal` method to restrict access to localhost requests. If exploited, it could allow unauthorized access to resources intended only for localhost. Setting `X-Forwarded-For: 127.0.0.1` in a request from a foreign host, will result in true for `ctx.IsFromLocal`. Access is limited to the scope of the affected process. This issue has been patched in version `2.49.2` with commit `b8c9ede6`. Users are advised to upgrade. There are no known workarounds to remediate this vulnerability without upgrading to the patched version. | ||||
| CVE-2023-41058 | 1 Parseplatform | 1 Parse-server | 2024-11-21 | 7.5 High |
| Parse Server is an open source backend server. In affected versions the Parse Cloud trigger `beforeFind` is not invoked in certain conditions of `Parse.Query`. This can pose a vulnerability for deployments where the `beforeFind` trigger is used as a security layer to modify the incoming query. The vulnerability has been fixed by refactoring the internal query pipeline for a more concise code structure and implementing a patch to ensure the `beforeFind` trigger is invoked. This fix was introduced in commit `be4c7e23c6` and has been included in releases 6.2.2 and 5.5.5. Users are advised to upgrade. Users unable to upgrade should make use of parse server's security layers to manage access levels with Class-Level Permissions and Object-Level Access Control that should be used instead of custom security layers in Cloud Code triggers. | ||||
| CVE-2023-41052 | 1 Vyperlang | 1 Vyper | 2024-11-21 | 3.7 Low |
| Vyper is a Pythonic Smart Contract Language. In affected versions the order of evaluation of the arguments of the builtin functions `uint256_addmod`, `uint256_mulmod`, `ecadd` and `ecmul` does not follow source order. This behaviour is problematic when the evaluation of one of the arguments produces side effects that other arguments depend on. A patch is currently being developed on pull request #3583. When using builtins from the list above, users should make sure that the arguments of the expression do not produce side effects or, if one does, that no other argument is dependent on those side effects. | ||||
| CVE-2023-40015 | 1 Vyperlang | 1 Vyper | 2024-11-21 | 3.7 Low |
| Vyper is a Pythonic Smart Contract Language. For the following (probably non-exhaustive) list of expressions, the compiler evaluates the arguments from right to left instead of left to right. `unsafe_add, unsafe_sub, unsafe_mul, unsafe_div, pow_mod256, |, &, ^ (bitwise operators), bitwise_or (deprecated), bitwise_and (deprecated), bitwise_xor (deprecated), raw_call, <, >, <=, >=, ==, !=, in, not in (when lhs and rhs are enums)`. This behaviour becomes a problem when the evaluation of one of the arguments produces side effects that other arguments depend on. The following expressions can produce side-effect: state modifying external call , state modifying internal call, `raw_call`, `pop()` when used on a Dynamic Array stored in the storage, `create_minimal_proxy_to`, `create_copy_of`, `create_from_blueprint`. This issue has not yet been patched. Users are advised to make sure that the arguments of the expression do not produce side effects or, if one does, that no other argument is dependent on those side effects. | ||||
| CVE-2023-39152 | 1 Jenkins | 1 Gradle | 2024-11-21 | 6.5 Medium |
| Always-incorrect control flow implementation in Jenkins Gradle Plugin 2.8 may result in credentials not being masked (i.e., replaced with asterisks) in the build log in some circumstances. | ||||