Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
9771 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-50104 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: sdm845: add missing soundwire runtime stream alloc During the migration of Soundwire runtime stream allocation from the Qualcomm Soundwire controller to SoC's soundcard drivers the sdm845 soundcard was forgotten. At this point any playback attempt or audio daemon startup, for instance on sdm845-db845c (Qualcomm RB3 board), will result in stream pointer NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101ecf000 [0000000000000020] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: ... CPU: 5 UID: 0 PID: 1198 Comm: aplay Not tainted 6.12.0-rc2-qcomlt-arm64-00059-g9d78f315a362-dirty #18 Hardware name: Thundercomm Dragonboard 845c (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sdw_stream_add_slave+0x44/0x380 [soundwire_bus] lr : sdw_stream_add_slave+0x44/0x380 [soundwire_bus] sp : ffff80008a2035c0 x29: ffff80008a2035c0 x28: ffff80008a203978 x27: 0000000000000000 x26: 00000000000000c0 x25: 0000000000000000 x24: ffff1676025f4800 x23: ffff167600ff1cb8 x22: ffff167600ff1c98 x21: 0000000000000003 x20: ffff167607316000 x19: ffff167604e64e80 x18: 0000000000000000 x17: 0000000000000000 x16: ffffcec265074160 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff167600ff1cec x5 : ffffcec22cfa2010 x4 : 0000000000000000 x3 : 0000000000000003 x2 : ffff167613f836c0 x1 : 0000000000000000 x0 : ffff16761feb60b8 Call trace: sdw_stream_add_slave+0x44/0x380 [soundwire_bus] wsa881x_hw_params+0x68/0x80 [snd_soc_wsa881x] snd_soc_dai_hw_params+0x3c/0xa4 __soc_pcm_hw_params+0x230/0x660 dpcm_be_dai_hw_params+0x1d0/0x3f8 dpcm_fe_dai_hw_params+0x98/0x268 snd_pcm_hw_params+0x124/0x460 snd_pcm_common_ioctl+0x998/0x16e8 snd_pcm_ioctl+0x34/0x58 __arm64_sys_ioctl+0xac/0xf8 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xe0 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 Code: aa0403fb f9418400 9100e000 9400102f (f8420f22) ---[ end trace 0000000000000000 ]--- 0000000000006108 <sdw_stream_add_slave>: 6108: d503233f paciasp 610c: a9b97bfd stp x29, x30, [sp, #-112]! 6110: 910003fd mov x29, sp 6114: a90153f3 stp x19, x20, [sp, #16] 6118: a9025bf5 stp x21, x22, [sp, #32] 611c: aa0103f6 mov x22, x1 6120: 2a0303f5 mov w21, w3 6124: a90363f7 stp x23, x24, [sp, #48] 6128: aa0003f8 mov x24, x0 612c: aa0203f7 mov x23, x2 6130: a9046bf9 stp x25, x26, [sp, #64] 6134: aa0403f9 mov x25, x4 <-- x4 copied to x25 6138: a90573fb stp x27, x28, [sp, #80] 613c: aa0403fb mov x27, x4 6140: f9418400 ldr x0, [x0, #776] 6144: 9100e000 add x0, x0, #0x38 6148: 94000000 bl 0 <mutex_lock> 614c: f8420f22 ldr x2, [x25, #32]! <-- offset 0x44 ^^^ This is 0x6108 + offset 0x44 from the beginning of sdw_stream_add_slave() where data abort happens. wsa881x_hw_params() is called with stream = NULL and passes it further in register x4 (5th argu ---truncated--- | ||||
| CVE-2024-50103 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Fix NULL Dereference in asoc_qcom_lpass_cpu_platform_probe() A devm_kzalloc() in asoc_qcom_lpass_cpu_platform_probe() could possibly return NULL pointer. NULL Pointer Dereference may be triggerred without addtional check. Add a NULL check for the returned pointer. | ||||
| CVE-2024-50102 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86: fix user address masking non-canonical speculation issue It turns out that AMD has a "Meltdown Lite(tm)" issue with non-canonical accesses in kernel space. And so using just the high bit to decide whether an access is in user space or kernel space ends up with the good old "leak speculative data" if you have the right gadget using the result: CVE-2020-12965 “Transient Execution of Non-Canonical Accesses“ Now, the kernel surrounds the access with a STAC/CLAC pair, and those instructions end up serializing execution on older Zen architectures, which closes the speculation window. But that was true only up until Zen 5, which renames the AC bit [1]. That improves performance of STAC/CLAC a lot, but also means that the speculation window is now open. Note that this affects not just the new address masking, but also the regular valid_user_address() check used by access_ok(), and the asm version of the sign bit check in the get_user() helpers. It does not affect put_user() or clear_user() variants, since there's no speculative result to be used in a gadget for those operations. | ||||
| CVE-2024-50101 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix incorrect pci_for_each_dma_alias() for non-PCI devices Previously, the domain_context_clear() function incorrectly called pci_for_each_dma_alias() to set up context entries for non-PCI devices. This could lead to kernel hangs or other unexpected behavior. Add a check to only call pci_for_each_dma_alias() for PCI devices. For non-PCI devices, domain_context_clear_one() is called directly. | ||||
| CVE-2024-50100 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: dummy-hcd: Fix "task hung" problem The syzbot fuzzer has been encountering "task hung" problems ever since the dummy-hcd driver was changed to use hrtimers instead of regular timers. It turns out that the problems are caused by a subtle difference between the timer_pending() and hrtimer_active() APIs. The changeover blindly replaced the first by the second. However, timer_pending() returns True when the timer is queued but not when its callback is running, whereas hrtimer_active() returns True when the hrtimer is queued _or_ its callback is running. This difference occasionally caused dummy_urb_enqueue() to think that the callback routine had not yet started when in fact it was almost finished. As a result the hrtimer was not restarted, which made it impossible for the driver to dequeue later the URB that was just enqueued. This caused usb_kill_urb() to hang, and things got worse from there. Since hrtimers have no API for telling when they are queued and the callback isn't running, the driver must keep track of this for itself. That's what this patch does, adding a new "timer_pending" flag and setting or clearing it at the appropriate times. | ||||
| CVE-2024-50099 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: probes: Remove broken LDR (literal) uprobe support The simulate_ldr_literal() and simulate_ldrsw_literal() functions are unsafe to use for uprobes. Both functions were originally written for use with kprobes, and access memory with plain C accesses. When uprobes was added, these were reused unmodified even though they cannot safely access user memory. There are three key problems: 1) The plain C accesses do not have corresponding extable entries, and thus if they encounter a fault the kernel will treat these as unintentional accesses to user memory, resulting in a BUG() which will kill the kernel thread, and likely lead to further issues (e.g. lockup or panic()). 2) The plain C accesses are subject to HW PAN and SW PAN, and so when either is in use, any attempt to simulate an access to user memory will fault. Thus neither simulate_ldr_literal() nor simulate_ldrsw_literal() can do anything useful when simulating a user instruction on any system with HW PAN or SW PAN. 3) The plain C accesses are privileged, as they run in kernel context, and in practice can access a small range of kernel virtual addresses. The instructions they simulate have a range of +/-1MiB, and since the simulated instructions must itself be a user instructions in the TTBR0 address range, these can address the final 1MiB of the TTBR1 acddress range by wrapping downwards from an address in the first 1MiB of the TTBR0 address range. In contemporary kernels the last 8MiB of TTBR1 address range is reserved, and accesses to this will always fault, meaning this is no worse than (1). Historically, it was theoretically possible for the linear map or vmemmap to spill into the final 8MiB of the TTBR1 address range, but in practice this is extremely unlikely to occur as this would require either: * Having enough physical memory to fill the entire linear map all the way to the final 1MiB of the TTBR1 address range. * Getting unlucky with KASLR randomization of the linear map such that the populated region happens to overlap with the last 1MiB of the TTBR address range. ... and in either case if we were to spill into the final page there would be larger problems as the final page would alias with error pointers. Practically speaking, (1) and (2) are the big issues. Given there have been no reports of problems since the broken code was introduced, it appears that no-one is relying on probing these instructions with uprobes. Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW (literal), limiting the use of simulate_ldr_literal() and simulate_ldrsw_literal() to kprobes. Attempts to place uprobes on LDR (literal) and LDRSW (literal) will be rejected as arm_probe_decode_insn() will return INSN_REJECTED. In future we can consider introducing working uprobes support for these instructions, but this will require more significant work. | ||||
| CVE-2024-50098 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down There is a history of deadlock if reboot is performed at the beginning of booting. SDEV_QUIESCE was set for all LU's scsi_devices by UFS shutdown, and at that time the audio driver was waiting on blk_mq_submit_bio() holding a mutex_lock while reading the fw binary. After that, a deadlock issue occurred while audio driver shutdown was waiting for mutex_unlock of blk_mq_submit_bio(). To solve this, set SDEV_OFFLINE for all LUs except WLUN, so that any I/O that comes down after a UFS shutdown will return an error. [ 31.907781]I[0: swapper/0: 0] 1 130705007 1651079834 11289729804 0 D( 2) 3 ffffff882e208000 * init [device_shutdown] [ 31.907793]I[0: swapper/0: 0] Mutex: 0xffffff8849a2b8b0: owner[0xffffff882e28cb00 kworker/6:0 :49] [ 31.907806]I[0: swapper/0: 0] Call trace: [ 31.907810]I[0: swapper/0: 0] __switch_to+0x174/0x338 [ 31.907819]I[0: swapper/0: 0] __schedule+0x5ec/0x9cc [ 31.907826]I[0: swapper/0: 0] schedule+0x7c/0xe8 [ 31.907834]I[0: swapper/0: 0] schedule_preempt_disabled+0x24/0x40 [ 31.907842]I[0: swapper/0: 0] __mutex_lock+0x408/0xdac [ 31.907849]I[0: swapper/0: 0] __mutex_lock_slowpath+0x14/0x24 [ 31.907858]I[0: swapper/0: 0] mutex_lock+0x40/0xec [ 31.907866]I[0: swapper/0: 0] device_shutdown+0x108/0x280 [ 31.907875]I[0: swapper/0: 0] kernel_restart+0x4c/0x11c [ 31.907883]I[0: swapper/0: 0] __arm64_sys_reboot+0x15c/0x280 [ 31.907890]I[0: swapper/0: 0] invoke_syscall+0x70/0x158 [ 31.907899]I[0: swapper/0: 0] el0_svc_common+0xb4/0xf4 [ 31.907909]I[0: swapper/0: 0] do_el0_svc+0x2c/0xb0 [ 31.907918]I[0: swapper/0: 0] el0_svc+0x34/0xe0 [ 31.907928]I[0: swapper/0: 0] el0t_64_sync_handler+0x68/0xb4 [ 31.907937]I[0: swapper/0: 0] el0t_64_sync+0x1a0/0x1a4 [ 31.908774]I[0: swapper/0: 0] 49 0 11960702 11236868007 0 D( 2) 6 ffffff882e28cb00 * kworker/6:0 [__bio_queue_enter] [ 31.908783]I[0: swapper/0: 0] Call trace: [ 31.908788]I[0: swapper/0: 0] __switch_to+0x174/0x338 [ 31.908796]I[0: swapper/0: 0] __schedule+0x5ec/0x9cc [ 31.908803]I[0: swapper/0: 0] schedule+0x7c/0xe8 [ 31.908811]I[0: swapper/0: 0] __bio_queue_enter+0xb8/0x178 [ 31.908818]I[0: swapper/0: 0] blk_mq_submit_bio+0x194/0x67c [ 31.908827]I[0: swapper/0: 0] __submit_bio+0xb8/0x19c | ||||
| CVE-2024-50097 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: fec: don't save PTP state if PTP is unsupported Some platforms (such as i.MX25 and i.MX27) do not support PTP, so on these platforms fec_ptp_init() is not called and the related members in fep are not initialized. However, fec_ptp_save_state() is called unconditionally, which causes the kernel to panic. Therefore, add a condition so that fec_ptp_save_state() is not called if PTP is not supported. | ||||
| CVE-2024-50096 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error The `nouveau_dmem_copy_one` function ensures that the copy push command is sent to the device firmware but does not track whether it was executed successfully. In the case of a copy error (e.g., firmware or hardware failure), the copy push command will be sent via the firmware channel, and `nouveau_dmem_copy_one` will likely report success, leading to the `migrate_to_ram` function returning a dirty HIGH_USER page to the user. This can result in a security vulnerability, as a HIGH_USER page that may contain sensitive or corrupted data could be returned to the user. To prevent this vulnerability, we allocate a zero page. Thus, in case of an error, a non-dirty (zero) page will be returned to the user. | ||||
| CVE-2024-50095 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mad: Improve handling of timed out WRs of mad agent Current timeout handler of mad agent acquires/releases mad_agent_priv lock for every timed out WRs. This causes heavy locking contention when higher no. of WRs are to be handled inside timeout handler. This leads to softlockup with below trace in some use cases where rdma-cm path is used to establish connection between peer nodes Trace: ----- BUG: soft lockup - CPU#4 stuck for 26s! [kworker/u128:3:19767] CPU: 4 PID: 19767 Comm: kworker/u128:3 Kdump: loaded Tainted: G OE ------- --- 5.14.0-427.13.1.el9_4.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/01YM03, BIOS 2.4.8 11/26/2019 Workqueue: ib_mad1 timeout_sends [ib_core] RIP: 0010:__do_softirq+0x78/0x2ac RSP: 0018:ffffb253449e4f98 EFLAGS: 00000246 RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 000000000000001f RDX: 000000000000001d RSI: 000000003d1879ab RDI: fff363b66fd3a86b RBP: ffffb253604cbcd8 R08: 0000009065635f3b R09: 0000000000000000 R10: 0000000000000040 R11: ffffb253449e4ff8 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff8caa1fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd9ec9db900 CR3: 0000000891934006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? __irq_exit_rcu+0xa1/0xc0 ? watchdog_timer_fn+0x1b2/0x210 ? __pfx_watchdog_timer_fn+0x10/0x10 ? __hrtimer_run_queues+0x127/0x2c0 ? hrtimer_interrupt+0xfc/0x210 ? __sysvec_apic_timer_interrupt+0x5c/0x110 ? sysvec_apic_timer_interrupt+0x37/0x90 ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? __do_softirq+0x78/0x2ac ? __do_softirq+0x60/0x2ac __irq_exit_rcu+0xa1/0xc0 sysvec_call_function_single+0x72/0x90 </IRQ> <TASK> asm_sysvec_call_function_single+0x16/0x20 RIP: 0010:_raw_spin_unlock_irq+0x14/0x30 RSP: 0018:ffffb253604cbd88 EFLAGS: 00000247 RAX: 000000000001960d RBX: 0000000000000002 RCX: ffff8cad2a064800 RDX: 000000008020001b RSI: 0000000000000001 RDI: ffff8cad5d39f66c RBP: ffff8cad5d39f600 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8caa443e0c00 R11: ffffb253604cbcd8 R12: ffff8cacb8682538 R13: 0000000000000005 R14: ffffb253604cbd90 R15: ffff8cad5d39f66c cm_process_send_error+0x122/0x1d0 [ib_cm] timeout_sends+0x1dd/0x270 [ib_core] process_one_work+0x1e2/0x3b0 ? __pfx_worker_thread+0x10/0x10 worker_thread+0x50/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xdd/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> Simplified timeout handler by creating local list of timed out WRs and invoke send handler post creating the list. The new method acquires/ releases lock once to fetch the list and hence helps to reduce locking contetiong when processing higher no. of WRs | ||||
| CVE-2024-50094 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sfc: Don't invoke xdp_do_flush() from netpoll. Yury reported a crash in the sfc driver originated from netpoll_send_udp(). The netconsole sends a message and then netpoll invokes the driver's NAPI function with a budget of zero. It is dedicated to allow driver to free TX resources, that it may have used while sending the packet. In the netpoll case the driver invokes xdp_do_flush() unconditionally, leading to crash because bpf_net_context was never assigned. Invoke xdp_do_flush() only if budget is not zero. | ||||
| CVE-2024-50093 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thermal: intel: int340x: processor: Fix warning during module unload The processor_thermal driver uses pcim_device_enable() to enable a PCI device, which means the device will be automatically disabled on driver detach. Thus there is no need to call pci_disable_device() again on it. With recent PCI device resource management improvements, e.g. commit f748a07a0b64 ("PCI: Remove legacy pcim_release()"), this problem is exposed and triggers the warining below. [ 224.010735] proc_thermal_pci 0000:00:04.0: disabling already-disabled device [ 224.010747] WARNING: CPU: 8 PID: 4442 at drivers/pci/pci.c:2250 pci_disable_device+0xe5/0x100 ... [ 224.010844] Call Trace: [ 224.010845] <TASK> [ 224.010847] ? show_regs+0x6d/0x80 [ 224.010851] ? __warn+0x8c/0x140 [ 224.010854] ? pci_disable_device+0xe5/0x100 [ 224.010856] ? report_bug+0x1c9/0x1e0 [ 224.010859] ? handle_bug+0x46/0x80 [ 224.010862] ? exc_invalid_op+0x1d/0x80 [ 224.010863] ? asm_exc_invalid_op+0x1f/0x30 [ 224.010867] ? pci_disable_device+0xe5/0x100 [ 224.010869] ? pci_disable_device+0xe5/0x100 [ 224.010871] ? kfree+0x21a/0x2b0 [ 224.010873] pcim_disable_device+0x20/0x30 [ 224.010875] devm_action_release+0x16/0x20 [ 224.010878] release_nodes+0x47/0xc0 [ 224.010880] devres_release_all+0x9f/0xe0 [ 224.010883] device_unbind_cleanup+0x12/0x80 [ 224.010885] device_release_driver_internal+0x1ca/0x210 [ 224.010887] driver_detach+0x4e/0xa0 [ 224.010889] bus_remove_driver+0x6f/0xf0 [ 224.010890] driver_unregister+0x35/0x60 [ 224.010892] pci_unregister_driver+0x44/0x90 [ 224.010894] proc_thermal_pci_driver_exit+0x14/0x5f0 [processor_thermal_device_pci] ... [ 224.010921] ---[ end trace 0000000000000000 ]--- Remove the excess pci_disable_device() calls. [ rjw: Subject and changelog edits ] | ||||
| CVE-2024-50092 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: netconsole: fix wrong warning A warning is triggered when there is insufficient space in the buffer for userdata. However, this is not an issue since userdata will be sent in the next iteration. Current warning message: ------------[ cut here ]------------ WARNING: CPU: 13 PID: 3013042 at drivers/net/netconsole.c:1122 write_ext_msg+0x3b6/0x3d0 ? write_ext_msg+0x3b6/0x3d0 console_flush_all+0x1e9/0x330 The code incorrectly issues a warning when this_chunk is zero, which is a valid scenario. The warning should only be triggered when this_chunk is negative. | ||||
| CVE-2024-50088 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix uninitialized pointer free in add_inode_ref() The add_inode_ref() function does not initialize the "name" struct when it is declared. If any of the following calls to "read_one_inode() returns NULL, dir = read_one_inode(root, parent_objectid); if (!dir) { ret = -ENOENT; goto out; } inode = read_one_inode(root, inode_objectid); if (!inode) { ret = -EIO; goto out; } then "name.name" would be freed on "out" before being initialized. out: ... kfree(name.name); This issue was reported by Coverity with CID 1526744. | ||||
| CVE-2024-50087 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix uninitialized pointer free on read_alloc_one_name() error The function read_alloc_one_name() does not initialize the name field of the passed fscrypt_str struct if kmalloc fails to allocate the corresponding buffer. Thus, it is not guaranteed that fscrypt_str.name is initialized when freeing it. This is a follow-up to the linked patch that fixes the remaining instances of the bug introduced by commit e43eec81c516 ("btrfs: use struct qstr instead of name and namelen pairs"). | ||||
| CVE-2024-50086 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix user-after-free from session log off There is racy issue between smb2 session log off and smb2 session setup. It will cause user-after-free from session log off. This add session_lock when setting SMB2_SESSION_EXPIRED and referece count to session struct not to free session while it is being used. | ||||
| CVE-2024-50085 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow Syzkaller reported this splat: ================================================================== BUG: KASAN: slab-use-after-free in mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881 Read of size 4 at addr ffff8880569ac858 by task syz.1.2799/14662 CPU: 0 UID: 0 PID: 14662 Comm: syz.1.2799 Not tainted 6.12.0-rc2-syzkaller-00307-g36c254515dc6 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:914 [inline] mptcp_nl_remove_id_zero_address+0x305/0x4a0 net/mptcp/pm_netlink.c:1572 mptcp_pm_nl_del_addr_doit+0x5c9/0x770 net/mptcp/pm_netlink.c:1603 genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x165/0x410 net/netlink/af_netlink.c:2551 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg net/socket.c:744 [inline] ____sys_sendmsg+0x9ae/0xb40 net/socket.c:2607 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2661 __sys_sendmsg+0x117/0x1f0 net/socket.c:2690 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e RIP: 0023:0xf7fe4579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f574556c EFLAGS: 00000296 ORIG_RAX: 0000000000000172 RAX: ffffffffffffffda RBX: 000000000000000b RCX: 0000000020000140 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 5387: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:878 [inline] kzalloc_noprof include/linux/slab.h:1014 [inline] subflow_create_ctx+0x87/0x2a0 net/mptcp/subflow.c:1803 subflow_ulp_init+0xc3/0x4d0 net/mptcp/subflow.c:1956 __tcp_set_ulp net/ipv4/tcp_ulp.c:146 [inline] tcp_set_ulp+0x326/0x7f0 net/ipv4/tcp_ulp.c:167 mptcp_subflow_create_socket+0x4ae/0x10a0 net/mptcp/subflow.c:1764 __mptcp_subflow_connect+0x3cc/0x1490 net/mptcp/subflow.c:1592 mptcp_pm_create_subflow_or_signal_addr+0xbda/0x23a0 net/mptcp/pm_netlink.c:642 mptcp_pm_nl_fully_established net/mptcp/pm_netlink.c:650 [inline] mptcp_pm_nl_work+0x3a1/0x4f0 net/mptcp/pm_netlink.c:943 mptcp_worker+0x15a/0x1240 net/mptcp/protocol.c:2777 process_one_work+0x958/0x1b30 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/ke ---truncated--- | ||||
| CVE-2024-50084 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test() Commit a3c1e45156ad ("net: microchip: vcap: Fix use-after-free error in kunit test") fixed the use-after-free error, but introduced below memory leaks by removing necessary vcap_free_rule(), add it to fix it. unreferenced object 0xffffff80ca58b700 (size 192): comm "kunit_try_catch", pid 1215, jiffies 4294898264 hex dump (first 32 bytes): 00 12 7a 00 05 00 00 00 0a 00 00 00 64 00 00 00 ..z.........d... 00 00 00 00 00 00 00 00 00 04 0b cc 80 ff ff ff ................ backtrace (crc 9c09c3fe): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<0000000040a01b8d>] vcap_alloc_rule+0x3cc/0x9c4 [<000000003fe86110>] vcap_api_encode_rule_test+0x1ac/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0400 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898265 hex dump (first 32 bytes): 80 04 0b cc 80 ff ff ff 18 b7 58 ca 80 ff ff ff ..........X..... 39 00 00 00 02 00 00 00 06 05 04 03 02 01 ff ff 9............... backtrace (crc daf014e9): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<00000000dfdb1e81>] vcap_api_encode_rule_test+0x224/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0700 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898265 hex dump (first 32 bytes): 80 07 0b cc 80 ff ff ff 28 b7 58 ca 80 ff ff ff ........(.X..... 3c 00 00 00 00 00 00 00 01 2f 03 b3 ec ff ff ff <......../...... backtrace (crc 8d877792): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000006eadfab7>] vcap_rule_add_action+0x2d0/0x52c [<00000000323475d1>] vcap_api_encode_rule_test+0x4d4/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0900 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898266 hex dump (first 32 bytes): 80 09 0b cc 80 ff ff ff 80 06 0b cc 80 ff ff ff ................ 7d 00 00 00 01 00 00 00 00 00 00 00 ff 00 00 00 }............... backtrace (crc 34181e56): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<00000000991e3564>] vcap_val_rule+0xcf0/0x13e8 [<00000000fc9868e5>] vcap_api_encode_rule_test+0x678/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0980 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898266 hex dump (first 32 bytes): 18 b7 58 ca 80 ff ff ff 00 09 0b cc 80 ff ff ff ..X............. 67 00 00 00 00 00 00 00 01 01 74 88 c0 ff ff ff g.........t..... backtrace (crc 275fd9be): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<000000001396a1a2>] test_add_de ---truncated--- | ||||
| CVE-2024-50083 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: fix mptcp DSS corruption due to large pmtu xmit Syzkaller was able to trigger a DSS corruption: TCP: request_sock_subflow_v4: Possible SYN flooding on port [::]:20002. Sending cookies. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 5227 at net/mptcp/protocol.c:695 __mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695 Modules linked in: CPU: 0 UID: 0 PID: 5227 Comm: syz-executor350 Not tainted 6.11.0-syzkaller-08829-gaf9c191ac2a0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:__mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695 Code: 0f b6 dc 31 ff 89 de e8 b5 dd ea f5 89 d8 48 81 c4 50 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 98 da ea f5 90 <0f> 0b 90 e9 47 ff ff ff e8 8a da ea f5 90 0f 0b 90 e9 99 e0 ff ff RSP: 0018:ffffc90000006db8 EFLAGS: 00010246 RAX: ffffffff8ba9df18 RBX: 00000000000055f0 RCX: ffff888030023c00 RDX: 0000000000000100 RSI: 00000000000081e5 RDI: 00000000000055f0 RBP: 1ffff110062bf1ae R08: ffffffff8ba9cf12 R09: 1ffff110062bf1b8 R10: dffffc0000000000 R11: ffffed10062bf1b9 R12: 0000000000000000 R13: dffffc0000000000 R14: 00000000700cec61 R15: 00000000000081e5 FS: 000055556679c380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020287000 CR3: 0000000077892000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> move_skbs_to_msk net/mptcp/protocol.c:811 [inline] mptcp_data_ready+0x29c/0xa90 net/mptcp/protocol.c:854 subflow_data_ready+0x34a/0x920 net/mptcp/subflow.c:1490 tcp_data_queue+0x20fd/0x76c0 net/ipv4/tcp_input.c:5283 tcp_rcv_established+0xfba/0x2020 net/ipv4/tcp_input.c:6237 tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915 tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2350 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5662 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6107 __napi_poll+0xcb/0x490 net/core/dev.c:6771 napi_poll net/core/dev.c:6840 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6962 handle_softirqs+0x2c5/0x980 kernel/softirq.c:554 do_softirq+0x11b/0x1e0 kernel/softirq.c:455 </IRQ> <TASK> __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0x1764/0x3e80 net/core/dev.c:4451 dev_queue_xmit include/linux/netdevice.h:3094 [inline] neigh_hh_output include/net/neighbour.h:526 [inline] neigh_output include/net/neighbour.h:540 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:236 ip_local_out net/ipv4/ip_output.c:130 [inline] __ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:536 __tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466 tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline] tcp_mtu_probe net/ipv4/tcp_output.c:2547 [inline] tcp_write_xmit+0x641d/0x6bf0 net/ipv4/tcp_output.c:2752 __tcp_push_pending_frames+0x9b/0x360 net/ipv4/tcp_output.c:3015 tcp_push_pending_frames include/net/tcp.h:2107 [inline] tcp_data_snd_check net/ipv4/tcp_input.c:5714 [inline] tcp_rcv_established+0x1026/0x2020 net/ipv4/tcp_input.c:6239 tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915 sk_backlog_rcv include/net/sock.h:1113 [inline] __release_sock+0x214/0x350 net/core/sock.c:3072 release_sock+0x61/0x1f0 net/core/sock.c:3626 mptcp_push_ ---truncated--- | ||||
| CVE-2024-50082 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2024-12-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race We're seeing crashes from rq_qos_wake_function that look like this: BUG: unable to handle page fault for address: ffffafe180a40084 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40 Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00 RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084 RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011 R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002 R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> try_to_wake_up+0x5a/0x6a0 rq_qos_wake_function+0x71/0x80 __wake_up_common+0x75/0xa0 __wake_up+0x36/0x60 scale_up.part.0+0x50/0x110 wb_timer_fn+0x227/0x450 ... So rq_qos_wake_function() calls wake_up_process(data->task), which calls try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock). p comes from data->task, and data comes from the waitqueue entry, which is stored on the waiter's stack in rq_qos_wait(). Analyzing the core dump with drgn, I found that the waiter had already woken up and moved on to a completely unrelated code path, clobbering what was previously data->task. Meanwhile, the waker was passing the clobbered garbage in data->task to wake_up_process(), leading to the crash. What's happening is that in between rq_qos_wake_function() deleting the waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding that it already got a token and returning. The race looks like this: rq_qos_wait() rq_qos_wake_function() ============================================================== prepare_to_wait_exclusive() data->got_token = true; list_del_init(&curr->entry); if (data.got_token) break; finish_wait(&rqw->wait, &data.wq); ^- returns immediately because list_empty_careful(&wq_entry->entry) is true ... return, go do something else ... wake_up_process(data->task) (NO LONGER VALID!)-^ Normally, finish_wait() is supposed to synchronize against the waker. But, as noted above, it is returning immediately because the waitqueue entry has already been removed from the waitqueue. The bug is that rq_qos_wake_function() is accessing the waitqueue entry AFTER deleting it. Note that autoremove_wake_function() wakes the waiter and THEN deletes the waitqueue entry, which is the proper order. Fix it by swapping the order. We also need to use list_del_init_careful() to match the list_empty_careful() in finish_wait(). | ||||