Total
51 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2021-47182 | 1 Linux | 1 Linux Kernel | 2025-03-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix scsi_mode_sense() buffer length handling Several problems exist with scsi_mode_sense() buffer length handling: 1) The allocation length field of the MODE SENSE(10) command is 16-bits, occupying bytes 7 and 8 of the CDB. With this command, access to mode pages larger than 255 bytes is thus possible. However, the CDB allocation length field is set by assigning len to byte 8 only, thus truncating buffer length larger than 255. 2) If scsi_mode_sense() is called with len smaller than 8 with sdev->use_10_for_ms set, or smaller than 4 otherwise, the buffer length is increased to 8 and 4 respectively, and the buffer is zero filled with these increased values, thus corrupting the memory following the buffer. Fix these 2 problems by using put_unaligned_be16() to set the allocation length field of MODE SENSE(10) CDB and by returning an error when len is too small. Furthermore, if len is larger than 255B, always try MODE SENSE(10) first, even if the device driver did not set sdev->use_10_for_ms. In case of invalid opcode error for MODE SENSE(10), access to mode pages larger than 255 bytes are not retried using MODE SENSE(6). To avoid buffer length overflows for the MODE_SENSE(10) case, check that len is smaller than 65535 bytes. While at it, also fix the folowing: * Use get_unaligned_be16() to retrieve the mode data length and block descriptor length fields of the mode sense reply header instead of using an open coded calculation. * Fix the kdoc dbd argument explanation: the DBD bit stands for Disable Block Descriptor, which is the opposite of what the dbd argument description was. | ||||
| CVE-2020-16297 | 4 Artifex, Canonical, Debian and 1 more | 4 Ghostscript, Ubuntu Linux, Debian Linux and 1 more | 2025-03-14 | 5.5 Medium |
| A buffer overflow vulnerability in FloydSteinbergDitheringC() in contrib/gdevbjca.c of Artifex Software GhostScript v9.18 to v9.50 allows a remote attacker to cause a denial of service via a crafted PDF file. This is fixed in v9.51. | ||||
| CVE-2024-24851 | 1 Automationdirect | 12 P1-540, P1-540 Firmware, P1-550 and 9 more | 2025-02-13 | 7.5 High |
| A heap-based buffer overflow vulnerability exists in the Programming Software Connection FiBurn functionality of AutomationDirect P3-550E 1.2.10.9. A specially crafted network packet can lead to a buffer overflow. An attacker can send an unauthenticated packet to trigger this vulnerability. | ||||
| CVE-2025-20175 | 2025-02-05 | 7.7 High | ||
| A vulnerability in the SNMP subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to improper error handling when parsing SNMP requests. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMP v2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMP v3, the attacker must have valid SNMP user credentials for the affected system. | ||||
| CVE-2025-20174 | 2025-02-05 | 7.7 High | ||
| A vulnerability in the SNMP subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to improper error handling when parsing SNMP requests. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMP v2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMP v3, the attacker must have valid SNMP user credentials for the affected system. | ||||
| CVE-2025-20170 | 2025-02-05 | 7.7 High | ||
| A vulnerability in the SNMP subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to improper error handling when parsing SNMP requests. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMP v2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMP v3, the attacker must have valid SNMP user credentials for the affected system. | ||||
| CVE-2025-20169 | 2025-02-05 | 7.7 High | ||
| A vulnerability in the SNMP subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to improper error handling when parsing SNMP requests. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMP v2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMP v3, the attacker must have valid SNMP user credentials for the affected system. | ||||
| CVE-2024-0131 | 2025-02-03 | 4.4 Medium | ||
| NVIDIA GPU kernel driver for Windows and Linux contains a vulnerability where a potential user-mode attacker could read a buffer with an incorrect length. A successful exploit of this vulnerability might lead to denial of service. | ||||
| CVE-2024-3933 | 1 Eclipse | 1 Openj9 | 2025-01-09 | 5.3 Medium |
| In Eclipse OpenJ9 release versions prior to 0.44.0 and after 0.13.0, when running with JVM option -Xgc:concurrentScavenge, the sequence generated for System.arrayCopy on the IBM Z platform with hardware and software support for guarded storage [1], could allow access to a buffer with an incorrect length value when executing an arraycopy sequence while the Concurrent Scavenge Garbage Collection cycle is active and the source and destination memory regions for arraycopy overlap. This allows read and write to addresses beyond the end of the array range. | ||||
| CVE-2023-52464 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2024-12-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/thunderx: Fix possible out-of-bounds string access Enabling -Wstringop-overflow globally exposes a warning for a common bug in the usage of strncat(): drivers/edac/thunderx_edac.c: In function 'thunderx_ocx_com_threaded_isr': drivers/edac/thunderx_edac.c:1136:17: error: 'strncat' specified bound 1024 equals destination size [-Werror=stringop-overflow=] 1136 | strncat(msg, other, OCX_MESSAGE_SIZE); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... 1145 | strncat(msg, other, OCX_MESSAGE_SIZE); ... 1150 | strncat(msg, other, OCX_MESSAGE_SIZE); ... Apparently the author of this driver expected strncat() to behave the way that strlcat() does, which uses the size of the destination buffer as its third argument rather than the length of the source buffer. The result is that there is no check on the size of the allocated buffer. Change it to strlcat(). [ bp: Trim compiler output, fixup commit message. ] | ||||
| CVE-2024-37305 | 1 Open Quantum Safe | 1 Oqs Provider | 2024-11-21 | 8.2 High |
| oqs-provider is a provider for the OpenSSL 3 cryptography library that adds support for post-quantum cryptography in TLS, X.509, and S/MIME using post-quantum algorithms from liboqs. Flaws have been identified in the way oqs-provider handles lengths decoded with DECODE_UINT32 at the start of serialized hybrid (traditional + post-quantum) keys and signatures. Unchecked length values are later used for memory reads and writes; malformed input can lead to crashes or information leakage. Handling of plain/non-hybrid PQ key operation is not affected. This issue has been patched in in v0.6.1. All users are advised to upgrade. There are no workarounds for this issue. | ||||
| CVE-2024-34476 | 2024-11-21 | 5.3 Medium | ||
| Open5GS before 2.7.1 is vulnerable to a reachable assertion that can cause an AMF crash via NAS messages from a UE: ogs_nas_encrypt in lib/nas/common/security.c for pkbuf->len. | ||||
| CVE-2024-20294 | 2024-11-21 | 6.6 Medium | ||
| A vulnerability in the Link Layer Discovery Protocol (LLDP) feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of specific fields in an LLDP frame. An attacker could exploit this vulnerability by sending a crafted LLDP packet to an interface of an affected device and having an authenticated user retrieve LLDP statistics from the affected device through CLI show commands or Simple Network Management Protocol (SNMP) requests. A successful exploit could allow the attacker to cause the LLDP service to crash and stop running on the affected device. In certain situations, the LLDP crash may result in a reload of the affected device. Note: LLDP is a Layer 2 link protocol. To exploit this vulnerability, an attacker would need to be directly connected to an interface of an affected device, either physically or logically (for example, through a Layer 2 Tunnel configured to transport the LLDP protocol). | ||||
| CVE-2023-5396 | 2024-11-21 | 7.4 High | ||
| Server receiving a malformed message creates connection for a hostname that may cause a stack overflow resulting in possible remote code execution. See Honeywell Security Notification for recommendations on upgrading and versioning. | ||||
| CVE-2023-52557 | 2024-11-21 | 7.5 High | ||
| In OpenBSD 7.3 before errata 016, npppd(8) could crash by a l2tp message which has an AVP (Attribute-Value Pair) with wrong length. | ||||
| CVE-2023-20049 | 1 Cisco | 13 Asr 9000v-v2, Asr 9001, Asr 9006 and 10 more | 2024-11-21 | 8.6 High |
| A vulnerability in the bidirectional forwarding detection (BFD) hardware offload feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause a line card to reset, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of malformed BFD packets that are received on line cards where the BFD hardware offload feature is enabled. An attacker could exploit this vulnerability by sending a crafted IPv4 BFD packet to an affected device. A successful exploit could allow the attacker to cause line card exceptions or a hard reset, resulting in loss of traffic over that line card while the line card reloads. | ||||
| CVE-2022-47375 | 1 Siemens | 18 6ag1414-3em07-7ab0, 6ag1414-3em07-7ab0 Firmware, 6ag1416-3es07-7ab0 and 15 more | 2024-11-21 | 7.5 High |
| A vulnerability has been identified in SIMATIC PC-Station Plus (All versions), SIMATIC S7-400 CPU 412-2 PN V7 (All versions), SIMATIC S7-400 CPU 414-3 PN/DP V7 (All versions), SIMATIC S7-400 CPU 414F-3 PN/DP V7 (All versions), SIMATIC S7-400 CPU 416-3 PN/DP V7 (All versions), SIMATIC S7-400 CPU 416F-3 PN/DP V7 (All versions), SINAMICS S120 (incl. SIPLUS variants) (All versions < V5.2 SP3 HF15), SIPLUS S7-400 CPU 414-3 PN/DP V7 (All versions), SIPLUS S7-400 CPU 416-3 PN/DP V7 (All versions). The affected products do not handle long file names correctly. This could allow an attacker to create a buffer overflow and create a denial of service condition for the device. | ||||
| CVE-2022-34399 | 1 Dell | 30 Alienware M15 A6, Alienware M15 A6 Firmware, Alienware M15 Ryzen Edition R5 and 27 more | 2024-11-21 | 5.1 Medium |
| Dell Alienware m17 R5 BIOS version prior to 1.2.2 contain a buffer access vulnerability. A malicious user with admin privileges could potentially exploit this vulnerability by sending input larger than expected in order to leak certain sections of SMRAM. | ||||
| CVE-2022-0519 | 2 Fedoraproject, Radare | 2 Fedora, Radare2 | 2024-11-21 | 7.1 High |
| Buffer Access with Incorrect Length Value in GitHub repository radareorg/radare2 prior to 5.6.2. | ||||
| CVE-2021-3581 | 1 Zephyrproject | 1 Zephyr | 2024-11-21 | 7 High |
| Buffer Access with Incorrect Length Value in zephyr. Zephyr versions >= >=2.5.0 contain Buffer Access with Incorrect Length Value (CWE-805). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-8q65-5gqf-fmw5 | ||||